Follow the below steps to reset the StoreVault root password:
1. Connect the serial cable between StoreVault and PC
2. Reboot the system
3. Access StoreVault boot menu via serial port using Hyper Terminal application with default setting(BPS-9600_DB-8_P-None-SB-1_FC-None)
3. The StoreVault begins the boot process.
4. While booting press Ctrl-C to display the boot menu.
Boot menu lists following option:
1) Normal Boot
2) Boot without /etc/rc
3) Change Password
4) Initialize all disks
4a) Same as option 4, but create a flexible root volume.
5) Maintenance mode boot
4. While booting press Ctrl-C to display the boot menu.
Boot menu lists following option:
1) Normal Boot
2) Boot without /etc/rc
3) Change Password
4) Initialize all disks
4a) Same as option 4, but create a flexible root volume.
5) Maintenance mode boot
5. Select option 3 to change the password and reboot the system.
Note: Do not try with other boot menu options, it may erase all your data.
No comments:
Post a Comment